MD-2 Dual Stepper Motor System Software 6/94

This diskette contains:

    The MD-2 program
    Level 1 subroutine libraries
    Level 2 subroutine libraries

Refer to the MD-2 manual for detailed information.

To use the MD2 program from your hard disk:

    Place the floppy in A: disk drive.
    Make a directory on your hard disk named MD2.

            MD MD2  <Enter>

    Copy the file from the floppy to the new directory.

            COPY A:*.* C:\MD2  <Enter>

    Change to the new directory and run the program

            CD \MD2  <Enter>
            MD2  <Enter>



To use the MD2 program from your floppy disk drive:

    Place the floppy in A: disk drive.
    Change to the floppy.

        A:  <Enter>

    Run the program.

        MD2  <Enter>


Begin by selecting the calibrate option on the control 
menu.  This process takes about 10 minutes but is 
necessary to produce accurate motor speeds on your 
particular computer.  Calibration is only needed once. 

Browse the on-line help for detailed information on
program usage.